收藏本站
MAX16814 Evaluation Kit
Additional Configurations and Features
The EV kit includes several other features to facilitate
evaluation of the IC. HB LED digital dimming control,
fault management through a FLT signal, synchronizing to
an external clock using the RT signal, and reconfiguring
the OVP for other voltages are detailed in the following
sections.
HB LED Digital-Dimming Control
The EV kit features a DIM PCB input pad for connect-
ing an external digital PWM signal. The DIM PCB pad
is pulled up to VCC by resistor R8. Apply a digital PWM
signal with a 0.8V logic-low (or less) and a 2.1V logic-
high (or greater) level, and frequencies from 100Hz to
20kHz. To adjust the HB LED brightness, vary the signal
duty cycle from 0 to 100% and maintain a minimum pulse
width of 1 F s. Apply the digital PWM signal to the DIM
and SGND PCB pads. Refer to the LED Dimming Control
The SYNC PCB pad is used for connecting an
external clock for synchronizing the IC switching fre-
quency through its RT pin. The signal must also have
a 4V P-P amplitude and frequencies from 390kHz to
410kHz. Apply the external clock signal to the SYNC
and SGND PCB pads. Refer to the Oscillator Frequency/
External Synchronization section in the MAX16814 IC
data sheet for additional information on the MAX16814
synchronizing feature.
OVP Configuration
The IC OVP resistors (R6 and R7) are configured for an
OVP of 33V. This sets the maximum channel (VOUT)
voltage at 33V. Capacitor C9 provides noise filtering to
the OVP signal. To reconfigure the circuit for a different
OVP voltage, replace resistor R6 with a different value
using the following equation:
R6 = ?
? 1 ? x R7
section in the MAX16814 IC data sheet for additional
information on the MAX16814 dimming feature.
?
?
OVP
1001.235
?
?
FLT and RT (External Clock
Synchronizing) Signals
The EV kit features the IC’s FLT and AC-coupled RT
signals. The FLT signal is pulled up to VCC by resistor
R9. The FLT signal is pulled low when there are open
or shorted HB LED(s) on an OUT_ channel or a thermal
shutdown condition has occurred. Refer to the Fault
where R7 is 10k I , OVP is the overvoltage protection
voltage desired, and R6 is the new resistor value for
obtaining the desired overvoltage protection. Refer to
the Open-LED Management and Overvoltage Protection
section in the MAX16814 IC data sheet for additional
information on the OVP feature.
Protections section in the MAX16814 IC data sheet for
further information on the FLT signal.
________________________________________________________________________________________ _ 5
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
MAX16816EVKIT+ KIT EVAL FOR MAX16816 LED DRIVER
MAX16818EVKIT+ KIT EVALUATION FOR MAX16818
MAX16820EVKIT+ EVAL KIT FOR MAX16820
MAX16821BEVKIT+ KIT EVAL FOR MAX16821B
MAX16822BEVKIT+ KIT EVAL FOR MAX16822
MAX16823EVKIT+ EVAL KIT FOR MAX16823
MAX16824EVKIT+ KIT EVAL FOR MAX16824
MAX16825EVKIT+ KIT EVAL FOR MAX16825
相关代理商/技术参数
MAX16814UTP+ 制造商:Maxim Integrated Products 功能描述:INTEGRATED, 4-CHANNEL, HIGH-BRIGHTNESS LED DRIVER WITH HIGH- - Rail/Tube
MAX16814UTP+T 制造商:Maxim Integrated Products 功能描述:INTEGRATED, 4-CHANNEL, HIGH-BRIGHTNESS LED DRIVER WITH HIGH- - Tape and Reel
MAX16814UUP+ 制造商:Maxim Integrated Products 功能描述:INTEGRATED, 4-CHANNEL, HIGH-BRIGHTNESS LED DRIVER WITH HIGH- - Rail/Tube
MAX16814UUP+T 制造商:Maxim Integrated Products 功能描述:INTEGRATED, 4-CHANNEL, HIGH-BRIGHTNESS LED DRIVER WITH HIGH- - Tape and Reel
MAX16815ASA+ 功能描述:LED照明驱动器 High-Voltage RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
MAX16815ASA+T 功能描述:LED照明驱动器 High-Voltage RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
MAX16815ATT/V+T 制造商:Maxim Integrated Products 功能描述:HIGH-VOLTAGE, 100MA/200MA ADJUSTABLE LINEAR HIGH-BRIGHTNESS - Tape and Reel
MAX16815ATT+T 功能描述:LED照明驱动器 High-Voltage RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N